SULFAMIC ACID tech

Item Code: RXSOL-19-1304-025

Sulphamic acid can be used for removing scales obtained from water in heating and cooling systems e.g. boilers, condensers, heat exchangers, jackets and coils Sulfamic Acid is a Zwitterion, a molecule with two charges that counteract each other, the Nitrogen and Oxygen have a greater pull on the bond pair of electrons due to the high electro-negativity, this causes the bond to be polar, the Nitrogen and Oxygen draw the electrons closer and become slightly negative, the Hydrogens become positive because the negative electrons are further away.other valueable product1) Sulfuric Acid N/50 Acid Solutions, Analytical Reagents, Analytical/Chromatography, By Reference Material, Chemical Synthesis,Part No:RXSOL-60-6185-0072) STP Neutralizer -Part No:RXSOL-40-5028-025.3)Vap Treat SOL 25 Ltr -Neutral Liquid for prevention of scale in seawater Evaporators Part No: RXSOL-51-6001-025.4) Safe Acid Descalex Liquid 25 LtrThis descaler specifically formulated and developed to rapidly clean mineral scale from passages in water-cooled or heated equipment. It improves Plant Efficiency, Lowers Cost, Conserves Energy, Decreases Down-Time.Part No: RXSOL-54-1048-025.5) Scale and Corrosion Inhibitor (Cooling Water Treatment) Metallic corrosion and scale controlling advanced formulated product for cooling systems ( open and closed cooling systems ).Part No:RXSOL-40-4091-210 6) Descalex Polymer ( Heat Exchanger): safe and effective way to remove scale deposits from all types of water-cooled and water-heated equipment. Part No.: RXSOL-40-1048-025.7) Descaling Liquid 60 Ltr : The most effective RXSOL-16-1008-060 ,Descaling Liquid - II is accomplished by circulation for large systems or components. In the case of small components, the soak method in an immersion bath can be used. Part No.: RXSOL-16-1008-060. 8) RXSOL ORG - 10 Membrane ALKA Clean :ORG 10 is a high pH formultion that has been designed specifically to remove organics, silt and other particulate deposits from polyamide, polysulfone and thin film composite membrane surfaces. This advanced, high s trength powder has the following features:

• pH adjusted to 10 0.5
• Highly effective at ambient temperatures
• Contains no surfactants and is quickly rinsed away
• Contains detergent builders, chelating agents and pH buffer

ORG 10 is suitable for use with all polyamide, polysulfone and thin film, composite membranes. It can be used at temperatures from 15°C (60°F) up to the maximum recommended by the membrane manufacturer.The standard dilution ratio is 25 grammes of ORG 10 per litre of water. Part No. : RXSOL-33-3320-025. 9) Antiscalant ORG EV 2030 :Part No.: RXSOL-33-3325-230.10) ANTISCALANT 9209 RX : Antiscalant 9209 Rx is specially designed to control the development of scale in seawater distillation plants. It is based on a synergistic blend of phosphonates which are found to be more effective than other polymers at controlling carbonate and sulphate scale formation in sea water distillation units . Part No.: RXSOL-51-6005-025.