Low Consistency Pulper - For Pulp & Paper Mills

Low consistency Pulper or D Type Pulper - For Paper Machine

Operating Principles'D' Section of tub is to increase the turbulence in the Tub causing bales/bundles to submerge rapidly thus, reduce the dwelling time suitable for continuous operations. Suitable for furnish of OCC, AOCC, Box Board and to separate the reject and fiber. The Fiber discharge line is connected to the pulp suction pump or directly fed to the storage towers.Application & Features 

• The model 'D' refers to the shape of Tub 
• Continuous Operation
• Operating consistency 4-6%
• Higher capacity (TPD) with reduced power input compared to  normal vertical Pulper
• S.S. Cast Rotor of special design for handling different grade of  raw material
• 'D' Pulper can be operated at ambient temp . as well as at elevated temp. upto 700C
• Heavy duty sturdy bearings take impact load of bales/waste paper bundles
• Removes Plastic in large pieces with little degradation.
• Reduce burden on downstream equipment.
• Decreases/eliminates clean out down time.
• External adjustment of rotor to maintain clearance between rotor and screen.