![DUBI CHEM MARINE INTERNATIONAL DUBI CHEM MARINE INTERNATIONAL](https://dubaiyellowpagesonline.com/images/cover_300.jpg)
DUBI CHEM MARINE INTERNATIONAL - | E-Showroom
DUBI CHEM MARINE INTERNATIONAL - | E-Showroom
Item Code: RXSOL-20-2023-050
1) MOYA OIL : This is effective and economical emulsifier. Safe to use on most metal surfaces, painted and coated surfaces and also used as a multipurpose degreaser in extremely hard cleaning conditions. Ready to use for tank cleaning or general degreasing. DOSE : Refer to technical datasheet. http://rxmarine.com/moya-oil-degreaser. Part No.- RXSOL-20-2023-0252 ) Moya Oil Concentrate: multipurpose degreaser in extremely hard cleaning conditions.Particles of soil and oil are rapidly reduced to colloidal size by this interfacial action and thereby more easily emulsified and washed away fresh or salt water having cleaned metal surface. Part No.- RXSOL-10-2011-025 3 ) M Oil moya : This is a versatile emulsifier for diverse types of Industrial, Railway and Marine cleaning. This product is Non Caustic/Non Alkali based & does not require any special extra precaution . This product has a flash point of 68 C (157 F). It is so easy & efficient to use that it is much more economical & faster than hand scrubbing operations. Further, it does not Corrode metals unlike other similar application products. Part No. RXSOL-10-2010-2104 ) Carbon Eco Clean : Specially designed for removal of carbon rust from any steel surface area and rust stain from Brass,Copper,S.S wood,ceramic and aluminium surfaces , painted or not . And act as surface brightner. Part No.- RXSOL-20-2054-125Procedure for Use :•RXSOL-20-2054-125is highly concentrate•Dilute in water (always use plastic jar and RXSOL-20-2054-125 should be added towater never add water to RXSOL-20-2054-125 )•Surface should be sound clean and free from oil, grease, dirt etc.•Diluted materials apply on rusted area for 15 to 20 minutes then wash off with water repeat if necessary. (For stubborn rusted stains.)Note: For steel surfaces; remove oil, grease and old paint. Wet down entire surface with neat Metal Bright- Rx and allow to dry. Second wash may be necessary. Surface should have a grey/white appearance when the Carbon Eco Clean is dry. Steel surfaces will have a resistance to rust and will render a good base for paint. For removal of rust stains on painted surfaces and wood, Carbon Eco Clean should be applied at full concentration for heavy stains, or diluted to 20-50% for light stains. Allow to soak for 15 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.5 ) RXSOL ORG-4 Part No.- RXSOL-16-1080-035 : unique stain and Spot absorbing Paste that serves a variety of purposes both ashore and Offshore. It's ideal for removing oil, rust, exhaust, waterline and transom stains on your Vessel. Removes rust and spot from any type of steel, stanchions and railings. Excellent for removing “rust bleeders” from the hull or deck without removing Paint from surface.Its non-abrasive quality means that it's safe to use on painted surfaces as well as on Pest-coat. Requires no sanding or compounding. Simply apply with a brush, sponge or cloth. Wait for 15 -20 minutes and then wipe off or rinse with copious amount of Water. 6 ) RXSOL ORG - 6 Part No.- RXSOL-20-2059-025 : all purpose degreaser for cleaning of Oil and Sludge with emulsifiers. It is an excellent blend of powerful cleaner and emulsifying inorganic products .Specially designed for engine room, degreasing of metal and cargo tank cleaning .Main feature of this product is, it finally dissociate slop emulsion to separate oil and water and inhibit calcium, magnesium, and silica scale and also help corrosion control by dispersing iron oxide.