FDH-1601 Vehicle gear oil into the ditch point tester

Scope

Vehicle gear oil into the ditch point tester applicable standards: SH / T0030 This instrument is mainly applicable to a ditch lubricant performance testing. When using the instrument, the container containing the sample stored at the test temperature for 18 hours, then scrape with a steel sample was a ditch, the specimen was observed within 10 seconds whether to flow back and completely cover the bottom of the container to determine the sample into a ditch characteristics.

Features

1, The instrument uses imported double dual compressor cascade refrigeration, environmentally friendly refrigerants, cooling speed.

2, double stainless steel cold bath, built-medium, without adding coolant, the insulation effect.

3, the overall structure, configuration dedicated scraper, special mention grasping tool.

4. The instrument uses PID temperature control, temperature control accuracy.

Technical Parameters

1. Temperature control mode: PID digital temperature controller import

2, temperature control accuracy: -60 ± 0.1 ℃

3, cooling method: import dual compressor refrigeration

4. Timing: Digital timer