Bhumeshwar Ind. Area, Shed "No.1, Plot No.1, Nr. Somnath Ind Area, Shed "No.1, Plot No.1, Nr. Somnath Ind Area, Kothariya, Rajkot -360002 Gujarat India.
1st Floor, No. 1, Dongda Fourth Street, Shatou Community, Chang'an Town Changqing South Road, Changsheng Community, Chang'an Town, Dongguan City, Guangdong Province ITC Changan Vanke Center Office Building
National University Science Park, West Third Ring Road, Zhengzhou, Henan, China National University Science Park, West Third Ring Road, Zhengzhou, Henan, China
Steel grit is an angular metallic abrasive produced by crushing bearing steel. steel grit is used for descaling,coating and corrosion removal, and surface etching. the angular particle shape provides a fast cleaning rate and an angular surface profile.steel grit is tempered to three different hardnesses. the hardest material, gh, is designed for use exclusivelyin air blasting equipment,stone cutting. the two softer materials, gl and gp, may also be used in centrifugal wheel blast equipment.steel grit application:steel grit blasting cleaning:steel shot and grit are used in cleaning applications for removal of loose material on metal surfaces. this type of cleaning is common in automotive industry (motor blocks, cylinder heads, etc.).steel grit stone cutting:steel grit is used in cutting hard stones, such as granite. the grit is used in large multi-blade frames which cut the blocks of granite into thin slices. sae j444 sizes:g10 g12 g14 g16 g18 g25 g40 g50 g80 g120steel grit specification:shape : angularhardness :gp:42 ~ 50hrc;gl:56 ~ 60hrc;gh:63 ~ 66hrcdensity : 7.4 g/cm3durability : >3000 timescertificate iso9001,saej444,sgschemical composition:cr 0.60-1.60%c 0.70 -1.20%mn 0.6 -1.20%si 0.40 -1.20%s ...
Steel grit is an angular metallic abrasive produced by crushing bearing steel. steel grit is used for descaling,coating and corrosion removal, and surface etching. the angular particle shape provides a fast cleaning rate and an angular surface profile.steel grit is tempered to three different hardnesses. the hardest material, gh, is designed for use exclusivelyin air blasting equipment,stone cutting. the two softer materials, gl and gp, may also be used in centrifugal wheel blast equipment.steel grit application:steel grit blasting cleaning:steel shot and grit are used in cleaning applications for removal of loose material on metal surfaces. this type of cleaning is common in automotive industry (motor blocks, cylinder heads, etc.).steel grit stone cutting:steel grit is used in cutting hard stones, such as granite. the grit is used in large multi-blade frames which cut the blocks of granite into thin slices. sae j444 sizes:g10 g12 g14 g16 g18 g25 g40 g50 g80 g120steel grit specification:shape : angularhardness :gp:42 ~ 50hrc;gl:56 ~ 60hrc;gh:63 ~ 66hrcdensity : 7.4 g/cm3durability : >3000 timescertificate iso9001,saej444,sgschemical composition:cr 0.60-1.60%c 0.70 -1.20%mn 0.6 -1.20%si 0.40 -1.20%s ...
SOUTH AFRICA YELLOW PAGESONLINE 
