Compositionsnagcupbsbbiznfealascd96.5±0.23.0±0.20.5±0.2< 0.1< 0.1< 0.1< 0.001< 0.02< 0.001< 0.03< 0.002 applicationsour Sn96.5ag3.0cu0.5 Solder Bar Is A Commonly Used Product By Adoption Of Lead-free Soldering Technique. It Features Relatively High Cost, But Bright Solder Joints And Outstanding Performance. Fully Complied With Rohs Compliance.  this Solder Bar Is An Ideal Replacement To The Traditional Leaded Solder Sn63pb37.the Lead Content Of Our Solder Bar Is Generally Less Than 100ppm. This Product Is Composed Of 96.5% Tin, 3% Silver, And 0.5% Copper. Due To The Adoption Of High-purity Raw Materials, Our Product Can Offer Superb Fluidity During The Soldering Process. It Can Significantly Reduce Such Technical Problems As Bridging, Icicle, And Some Others. It Is Ideal For Both Wave Soldering And Dip Soldering Processes, Which Have High Demand For Environmental Protection. featureseutectic Alloy.bridge-free And Icicle-free Soldering.smooth, Bright, Well-formed Fillets, Free Of Gross Micro-cracks, Irrespective Of The Cooling Rate.good Through-hole Penetration.good Topside Fillet Formation.dross Rate Equal Or Lower Than Tin-lead Solder.also Performs Well In Selective And Dip Soldering....
Huatao group - Corrugator belt & Spare partsweb: www.htwirebelt.com www(dot)htwirebelt.com email: [email] maple(at)huataogroup.com tel: 0086 133 8311 0583 whatsapp: 0086 133 8311 0583 nc cut off machine vailable breadth: 1400-2200mm specification: 1.max machine speed: 200m /min, when cutting length is 0.5m speed is 100m /min 2.cutting length: 500mm-9999mm, cutting accuracy±1mm 3.up to 999 job size can be preset, auto change job size without machine stop, connected with the computer to make production management easy 4.all drive gear made of high quality alloy steel, which are heat treated and exactitude processed, high drive accuracy and long life 5.circulating lubrication to insure lubricate and also help to clean and cool 6.paper entering and out are separated, each have their frequency convert motor to control speed, synchronized driven, stable and low noise 7.double-row round wheels are used at entrance to reduce the cutting errors caused by dithering of paper board. 8.exit and sending platform use round wheels and conveyer belt, which make paper board ejection steady. 9.round wheels device pneumatic controlled, special design, easy to operate...
SOUTH AFRICA YELLOW PAGESONLINE 
